Product Reviews

SmallRig 1138 Camera Clamp Review

A compact clamp for creators who need to attach a small camera, monitor, light, or microphone to a rod, tube, table, or frame.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig 1138 camera clamp review is for creators who want a flexible way to place compact video gear on nearby rods, tubes, tables, or frames.

Its clamp, dual ball head, 1/4-inch screw, and included action-camera adapter make it a versatile mounting option, with a 1.5 kg maximum load that calls for careful matching to the attached setup.

SmallRig 1138 Clamp Review Summary

The quick verdict

SmallRig 1138 Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Camera Clamp

A compact clamp for creators who need to attach a small camera, monitor, light, or microphone to a rod, tube, table, or frame.

  • Clamp and dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
  • Intended to mount on rods, tubes, tables, frames, and tripods without drilling.
  • Maximum load capacity of 1.5 kg; weigh the complete device setup before mounting.
  • Aluminum and stainless steel construction, with a non-slip thread and anti-twist structure.

Pros

  • Combines a clamp and adjustable dual ball head in one mounting assembly.
  • Can attach to several everyday support types, including tables, frames, rods, and tubes.

Consider before buying

  • The 1.5 kg maximum load makes it a poor match for heavier cameras or accessory combinations.
  • Dynamic use requires extra care: plan to attach a safety rope as advised.
Read the full review summary

SmallRig 1138 combines a clamp with a dual ball head and 1/4-inch-20 screw, so the mounting point and attached device can be positioned as one compact assembly.

The clamp can attach to a rod, tube, table, frame, or tripod, while the adapter adds an action-camera mounting option.

Its aluminum and stainless steel construction and anti-twist design are aimed at giving compact gear a more secure position.

This model suits creators who need to place a lightweight camera or accessory close to a desk, vehicle, or other compatible support, and who value adjustable positioning over a long reach.

Check the support’s dimensions and the total device weight before choosing it: the listed maximum load is 1.5 kg, and the manufacturer specifically recommends a safety rope for dynamic use.

The buying factors

SmallRig 1138 Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting versatility

The clamp is designed for rods, tubes, tables, frames, and tripods, and its 1/4-inch-20 screw accepts a range of small accessories.

8/10

Position adjustment

The dual ball-head design provides adjustable positioning, useful when framing a camera or placing a light or microphone.

6/10

Load suitability

A maximum load of 1.5 kg supports a range of compact gear, but limits its fit for heavier setups.

8/10

Material choice

Aluminum and stainless steel construction offers a metal-bodied option for regular rigging.

8/10

Accessory readiness

The package includes an action-camera adapter alongside the clamp, broadening its out-of-box mounting options.

6/10

Dynamic-use practicality

The product can be used in dynamic scenarios, but the safety-rope instruction adds a setup step and should be taken seriously.

Key Features and Specifications of SmallRig 1138 Clamp

  • Clamp and dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
  • Intended to mount on rods, tubes, tables, frames, and tripods without drilling.
  • Maximum load capacity of 1.5 kg; weigh the complete device setup before mounting.
  • Aluminum and stainless steel construction, with a non-slip thread and anti-twist structure.
  • Package includes a super camera clamp and an action-camera mount adapter.
  • Listed dimensions are 3.74 × 3.35 × 0.98 inches, and listed weight is 0.2 kg.
  • For dynamic use, the manufacturer advises attaching a safety rope to help prevent an accidental drop.

Pros and Cons of SmallRig 1138 Clamp

Pros

  • Combines a clamp and adjustable dual ball head in one mounting assembly.
  • Can attach to several everyday support types, including tables, frames, rods, and tubes.
  • The 1/4-inch-20 screw accommodates a range of compatible compact equipment.
  • Includes an action-camera adapter, so a separate adapter is not needed for that mounting option.
  • Metal construction and an anti-twist design suit a small rigging accessory intended for repeated setup.

Consider before buying

  • The 1.5 kg maximum load makes it a poor match for heavier cameras or accessory combinations.
  • Dynamic use requires extra care: plan to attach a safety rope as advised.
  • The short clamp assembly is intended for direct mounting near a support, so buyers needing a longer offset should confirm that this form factor works for their framing.

Who Should Buy SmallRig 1138 Clamp?

Good fit

Consider the SmallRig 1138 Clamp if you want to mount compact gear on a nearby table edge, frame, rod, or tube and adjust its angle with a dual ball head.

It is particularly relevant for a small camera, action camera, monitor, LED light, or microphone that uses the included 1/4-inch-20 screw or action-camera adapter.

Before buying, check that the support fits the clamp and that the combined mounted gear stays within the 1.5 kg maximum.

For vehicle or other moving setups, follow the safety-rope guidance and make sure there is a suitable point to secure one.

Who should skip it

Skip this model if your setup exceeds its 1.5 kg maximum load or needs a longer arm to place the device well away from the clamped support.

If the mount will be exposed to movement, do not proceed unless you can use the recommended safety rope and secure the clamp to a suitable support.

How the SmallRig 1138 Clamp Fits a Compact Rig

A clamp-based mounting point

The 1138 is designed to attach directly to a nearby rod, tube, table, frame, or tripod, so it can place gear where a standard camera mount is inconvenient.

The no-drilling approach makes it useful for temporary setups, but the support’s shape and size still determine whether the clamp can be positioned as intended.

Dual ball-head flexibility

The dual ball head lets the attached device be adjusted relative to the clamped support.

That gives the user flexibility when aiming a small camera or orienting a light, monitor, or microphone; it does not add reach, so check the distance from support to desired position when planning a shot.

Load limit and setup discipline

The listed maximum load is 1.5 kg, which makes checking the combined weight of the device and any attached accessories essential. The product also advises using a safety rope in dynamic scenarios.

That guidance matters when mounting gear in a vehicle or anywhere movement could jostle the clamp.

Included adapter and construction

The package pairs the clamp with an action-camera mount adapter, while the 1/4-inch-20 screw serves other compatible gear. Aluminum and stainless steel construction, non-slip threads, and an anti-twist structure address the demands of a repositionable mount.

Buyers should still confirm the connection type and fit of their specific equipment.

Alternatives to SmallRig 1138 Clamp

Camera Mounts & Clamps alternative

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit

Choose the 2732 if a longer 9.8-inch reach and separate articulating arm better suit your framing, or if the extra 3/8-inch threaded connection is useful.

The 1138 is the more direct fit when you want a compact clamp-and-ball-head assembly with an included action-camera adapter.

  • The 2732 pairs a super clamp with a 9.8-inch articulating arm.
  • Its clamp has 1/4-inch and 3/8-inch threads, opens from 15 to 54 mm, and the arm has 1/4-inch screws at both ends.
  • The SmallRig 1138 Clamp combines a clamp and dual ball head, includes an action-camera adapter, and has a 1.5 kg maximum load.

Camera Mounts & Clamps alternative

SmallRig 4103 Double Clamp Mount
4.6/5

800+ ratings

Read Amazon Reviews

SmallRig 4103 Double Clamp Mount

Consider the 4103 when you need a double-clamp arrangement for a rod and a higher listed load capacity.

The 1138 is a simpler choice for attaching compact gear to a support, especially when the included action-camera adapter is useful.

  • The 4103 has two clamps and a 360-degree rotating double ball head.
  • It is designed for rods from 14 to 60 mm in diameter and lists a maximum load of 3.5 kg.
  • The SmallRig 1138 Clamp has one clamp, an adjustable dual ball head, an action-camera adapter, and a 1.5 kg maximum load.

Is SmallRig 1138 Clamp Worth It?

The SmallRig 1138 Camera Clamp is worth considering for creators who need a compact, adjustable way to mount lightweight gear to a nearby rod, tube, table, frame, or tripod.

Its included action-camera adapter, dual ball head, and metal construction make it a useful small-rig accessory.

Keep the 1.5 kg maximum load and safety-rope guidance central to the decision. Confirm your support and connection fit before buying, and choose another mounting arrangement if your setup needs more load capacity or a longer reach.

Your review at a glance

SmallRig 1138 Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Camera Clamp

A compact clamp for creators who need to attach a small camera, monitor, light, or microphone to a rod, tube, table, or frame.

  • Clamp and dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
  • Intended to mount on rods, tubes, tables, frames, and tripods without drilling.
  • Maximum load capacity of 1.5 kg; weigh the complete device setup before mounting.
  • Aluminum and stainless steel construction, with a non-slip thread and anti-twist structure.

Written by

palenquepark.com Editorial Team

Editorial team

palenquepark.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 1138 Camera Clamp

SmallRig 1138 Camera Clamp

A compact clamp for creators who need to attach a small camera, monitor, light, or microphone to a rod, tube, table, or frame.

  • Clamp and dual ball head with a 1/4-inch-20 screw for attaching compatible cameras and accessories.
  • Intended to mount on rods, tubes, tables, frames, and tripods without drilling.
Check Video Reviews on Amazon