The SmallRig Super Clamp gives camera builders a way to add a mounting point to a suitable bar, shelf, or other surface without making a permanent fixture.
This SmallRig Super Clamp review focuses on its adjustable jaw, threaded attachment points, and the setup checks that matter before mounting gear.
SmallRig Super Clamp Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera users who need to attach compatible gear to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm at maximum and 15 mm at minimum.
- Clamp is intended for surfaces and objects within its jaw range, including hooks, shelves, plate glass, and crossbars.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Made from aluminum alloy and stainless steel.
Pros
- A useful way to create an accessory mounting point on a compatible surface away from the camera body.
- The 15–40 mm jaw range covers several common bars and flat mounting surfaces.
Consider before buying
- The jaw range is finite, so buyers should measure the intended mounting point before choosing it.
- The 3.3-pound maximum weight recommendation calls for care when the attached setup is heavy or has a long arm that can increase leverage.
Read the full review summary
This is a simple mounting base for rigs that need to place a camera accessory somewhere a tripod or camera cage cannot reach.
Its jaw opens from 15 mm to about 40 mm, while the clamp body provides 1/4-inch and 3/8-inch threaded holes for compatible accessories. Rubber pads are intended to help grip the mounted surface and reduce scratching.
The clamp is most compelling when you already know where it will attach and which threaded accessory will connect to it.
Its compact 130 g form and aluminum alloy and stainless steel construction make it a practical piece of rig hardware, but the product data gives a maximum weight recommendation of 3.3 pounds; buyers should treat that as a limit to check against the complete mounted setup, not as a universal guarantee across every surface or movement.
The buying factors
SmallRig Super Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The jaws can attach to a range of surfaces within the 15–40 mm opening, including bars, shelves, and plate glass.
Accessory compatibility
Both 1/4-inch and 3/8-inch threaded holes give it useful options for compatible rig accessories.
Grip protection
Updated rubber pads are designed to help limit slipping and scratching at the contact points.
Portability
At 130 g and described as compact when folded, it should be easy to include in a camera kit.
Load guidance
A 3.3-pound maximum weight recommendation is provided, though the setup and attachment surface still need careful consideration.
Setup simplicity
The basic clamp-and-thread design is straightforward, provided the jaw fits the surface and the accessory thread matches.
Key Features and Specifications of SmallRig Super Clamp
- Adjustable jaw opens to about 40 mm at maximum and 15 mm at minimum.
- Clamp is intended for surfaces and objects within its jaw range, including hooks, shelves, plate glass, and crossbars.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Made from aluminum alloy and stainless steel.
- Rubber pads on the clamp parts are designed to help prevent slipping and scratching.
- Compact design with a listed item weight of 130 g and a maximum weight recommendation of 3.3 pounds.
- Package includes one super clamp.
Pros and Cons of SmallRig Super Clamp
Pros
- A useful way to create an accessory mounting point on a compatible surface away from the camera body.
- The 15–40 mm jaw range covers several common bars and flat mounting surfaces.
- Two thread sizes broaden its compatibility with rig accessories.
- Rubber contact pads may help protect the surface and improve grip.
Consider before buying
- The jaw range is finite, so buyers should measure the intended mounting point before choosing it.
- The 3.3-pound maximum weight recommendation calls for care when the attached setup is heavy or has a long arm that can increase leverage.
- The clamp supplies the mounting base only; the needed threaded accessory must be selected separately.
Who Should Buy SmallRig Super Clamp?
Good fit
Consider the SmallRig Super Clamp if you need a compact way to mount compatible camera gear to a rod, crossbar, shelf, or other surface that fits its jaw.
The threaded holes make it useful as a starting point for a modular rig, especially when your planned accessory already uses a 1/4-inch or 3/8-inch connection.
Before buying, measure the surface at the exact clamping point and check the accessory thread.
Also consider the complete setup's weight and how far it will extend from the clamp; a heavier or more extended rig can put different demands on the attachment than a compact accessory.
Who should skip it
Skip this clamp if the surface you need to attach to falls outside the 15–40 mm jaw range, or if you need a complete arm or camera mount included with the clamp.
Choose another mounting approach if your setup exceeds the stated 3.3-pound maximum weight recommendation or requires a mounting method other than clamping and threaded accessory attachment.
What the SmallRig Super Clamp means for a camera rig
Check the jaw against the mounting surface
The stated 15 mm minimum and roughly 40 mm maximum opening make measuring the target surface the first practical step.
A surface that fits between those limits is only a starting point: check that the clamp can sit squarely and that the surrounding space leaves room to tighten and position it.
Plan the connection on both sides
The clamp offers 1/4-inch and 3/8-inch threaded holes, so the accessory and any adapter in the rig need to match one of those connections.
Mapping the connection before purchase helps avoid finding that the clamp fits the surface but cannot connect directly to the planned accessory.
Consider load and leverage together
The listed maximum weight recommendation is 3.3 pounds.
When assessing a camera or accessory setup, include the whole attached assembly and its reach: a long arm can apply more leverage than a compact attachment, so positioning and the suitability of the surface deserve attention.
Use the pads as contact protection
Rubber pads are intended to help reduce slipping and scratching where the clamp meets the surface.
They are a useful part of the design, but they do not remove the need to choose a suitable mounting point and confirm that the clamp is seated securely.
Alternatives to SmallRig Super Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit
Choose the main clamp if you want a compact mounting base and already have a compatible accessory to attach. Choose this kit if you need an articulating arm included and its wider jaw opening suits the target surface.
- This kit combines a clamp with a 9.8-inch articulating arm that has 1/4-inch screws at both ends.
- Its clamp opens to a maximum of 54 mm and minimum of 15 mm, and the arm has double 360-degree ball-head articulation.
- The SmallRig Super Clamp provides a clamp and threaded holes, while the accessory arm needs to be supplied separately.
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount
The main clamp suits buyers who want a standalone base with two thread sizes. Consider this alternative when an included ball-head mount and action-camera adapter better match the planned setup; check that its included connections suit your gear.
- This clamp mount includes a double ball-head arrangement, a 1/4-inch-20 screw, and an action-camera mount adapter. Its listed weight capacity is up to 1.5 kg.
- The SmallRig Super Clamp is a standalone clamp with 1/4-inch and 3/8-inch threaded holes; its product details give a 3.3-pound maximum weight recommendation.
Is SmallRig Super Clamp Worth It?
The SmallRig Super Clamp is worth considering for a camera rig that needs a compact mounting point on a surface between 15 and about 40 mm thick.
Its dual thread options, rubber pads, and metal construction make it a flexible base for compatible accessories.
Buy it after checking the jaw fit, thread compatibility, and weight and reach of the complete setup. If you need an articulating arm or a ready-to-use ball-head mount, select a configuration that includes those parts.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Super Clamp
A compact clamp for camera users who need to attach compatible gear to rods, shelves, or other surfaces within its jaw range.
- Adjustable jaw opens to about 40 mm at maximum and 15 mm at minimum.
- Clamp is intended for surfaces and objects within its jaw range, including hooks, shelves, plate glass, and crossbars.
- Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for attaching compatible accessories.
- Made from aluminum alloy and stainless steel.